computer radio control system
EN
4.3.6
Changing the transmitter mode
The transmitter is equiped with universal multimode gimbals. Both
gimbals are identical and can be adjusted mechanically for modes 1-
5. After mechanical adjustment it is necessary to set a specific
transmitter mode in the menu System – Configuration – Stick mode
1-4.
To change the quad sticks settings, unscrew the back cover of the
transmitter and disconnect the battery connector.
A. Setting the multi-mode gimbal into the mode without
locking the middle position - gas
1.
A.
Loosen the screw
2.
C.
Lift the lever B so as it is possible to arrest the lock
3.
C
Turn the lock 90° in the direction of the arrow and arrest the
lever in the upper position.
B
4.
A.
Tighten the screw
5.
D
E
Tightening the the screws and sets the desired tension with
steps and smooth brake.
1.
A.
Loosen the screw
2.
B.
Slightly lift the lever
3.
C
B
Turn the lock in the direction of the arrow and arrest the lever
in the upper position.
4.
C
Move the lever in the direction of the arrow to release the lever
B.
5.
A.
Tighten the screw
6.
Loosen the screws E and D in a position so that tension is removed
from the stick.
B. Setting the multi-mode gimbal into the mode with locking
the middle position - elevator
E
D
5
5
1
A
C
B
2
3
B
1
A
C
2
3
E
D
5
29
Summary of Contents for duplex DS-16 II
