JETI model Central Box 200, Manual

Page: 6 / 30

EN
2.3 Magnetic switch
( Central Box 200 only)
The magnetic switch is used to turn the Central Box 200 on or off
and is connected to a separate slot labeled “Switch”. To turn on the
Central Box using the magnetic switch it is necessary to hold the
supplied magnet carrier (key) to
the target so that the carrier (key)
and the target on the magnetic switch are properly oriented
(align the dots).
Fig. 3 : Description of magnetic switch and the key
Green LED
- flashing LED signals proper detection of the magnet key
- steady LED signals “On” state
When the magnet key is held to the target in the proper orientation,
the green LED glow steadily after 1 second indicating that the
electronic switch is turned on.
Switching off is done in a similar manner, when the magnet key is
held to the target in the proper orientation, after 1 second, the
green LED goes off and the system switches off.
If the switch is not plugged in the Central Box, the Central Box is
switched on.
The system remembers whether it has been switched on or off. If
the system is switched “on” via the magnetic switch and then the
power supply is disconnected, when the batteries are re-connected
to the system automatically returns to the “on” state. For safety
reasons, always switch the system off via magnetic switch before
disconnecting the power batteries.
Key
Mounting Hole Target Led On
6 EN