EN
RC Switch
Magnetic Switch
Input Voltage
SERV
O
Rsat2 (Rx1)
SERVO
Rsat2 (Rx2)
SERVO/Sensor
input voltage
4-14V
Fig.
10
: Block diagram of Central Box
200
connection - PPM variant
3.4
Connecting Central Box – EX Bus variant
Receivers can be connected to the Central Box using the
Rx
1
and
Rx
2
inputs.
Ext1
is an input for telemetry sensor. Telemetry is transmitted to the
receivers via
EX Bus
.
Channels 14
and
15
can be configured as servo outputs or as
inputs for connecting telemetry sensors
( Central Box 200 only)
.
Configuring the Central Box is in this case done directly in the
transmitter via
EX Bus
.
When operating the
Central Box
with
DC/DS transmitter
, it is
recommended to use two receivers communicating with the
transmitter in the wireless mode "Double path".
12 EN
PPM
PPM
Ext.
Summary of Contents for Central Box 200
Page 30: ...EN 30 EN...