Jetboil Genesis, Instructions Manual

Page: 11 / 44

10
Lighting the Burners:
Ensure Cooking Grates are free of any cookware prior
to lighting. Gas build-up can occur, resulting in
increased flame eruption.
1. Open either control valve (3.1) counterclockwise until fully
opened and gas flow can be heard.
NOTE: Our advanced Simmer Control technology requires 4 complete
rotations to achieve full gas flow.
2. To light, flip the Igniter Lever (3.2) as shown in Fig. 3.
Repeat as necessary.
3. If ignition does not occur within 5 seconds, close control valves (3.2) and
wait 5 minutes before repeating the procedure.
Cooking:
1. Rotate control valve (3.1) of the lit burner clockwise to decrease flame
setting.
2. If using the Jetboil 5L Flux Pot (1.3), add liquid or liquid food to the pot
before placing on the Cooking Grate.
Do not heat empty 5L Flux Pot.
3. Set the 5L Flux Pot on the center of either cooking grate.
The bottom of the pot will center on the grate to maximize heating
performance.
4. If using any other cookware, ensure cookware is centered
on the cooking grate.
Operating Instructions are continued on page 11.
WARNING
CAUTION