STEP 2: Verifi cation
1.
After the alarm is successfully connected to the wireless network, allow 2 minutes before
proceeding.
2.
Using your internet connected device (i.e. Laptop, Desktop, etc.), open a new web browser
window or tab.
Note:
you must be connected to the same router as your
JET
WiFi Messenger Alarm
.
3. Type the following into the address field at the top of your web browser:
www.mywifialarm.com or scan QR code.
4. F
ollow the registration link.
5.
After reading and accepting the terms of the
JET
WiFi Messenger Alarm, enter your alarm’s
Unit
ID# located on the back of the battery compartment cover. (DO NOT ENTER THE COLONS).
Click Confi gure.
6.
If the
JET
WiFi Messenger Alarm has not been
v
erified
, the DEVICE
REGISTRATION
screen will
open and you will be required to enter an email
address to receive a
verifica
tion link. Enter your
email address and press the Request Verifi cation
Code button.
Note:
All future alarm
notifica
tions will be sent to
this verifi cation
email address in addition
to the email addresses entered on the
JET
WiFi Messenger Alarm’s setup page.
7.
An email will be sent to the verifi cation
address entered with a link to the No
tification
Setup
page. Click this link to access the Not
ification
Setup
page. This email must be received and opened by
the same device used for the steps above.
8.
If the
JET
WiFi Messenger Alarm has already gone through the
verification
process, the web
browser will immediately be redirected to the
Notifica
tion Setup page.
E2
NOTE: Before continuing, make sure device shows
a
CONSTANT BLUE LIGHT
(not flashing light)
Please enter the Unit ID# on the label of your alarm system
This is found on the back of the Batery Compartment lid
This will be similar to
A1B5 C3D2 E7C2
Configure
WARNING!
USE ALKALINE BATTERY
ONLY, NON-ALKALINE
BATTERY MAY REDUCE
PRODUCT PERFORMANCE
UNIT ID#
A1B5:C3D2:E7C2