JET
®
WiFi Messenger
Alarm
Quick Start
Before You Begin
Mount and wire your alarm according to installation instructions.
NOTE:
• Cellular WiFi hotspots are not recommended for use with
this WiFi alarm, as intermittent or unreliable notifi cation
service can result.
• WPA2 Security must be enabled on the wireless router
for WiFi connections.
This quick start manual covers setup using a WPS
connection to your wireless network.
STEP 1: WiFi Network Setup (WPS)
The blue network status light will illuminate
steadily when the
JET
WiFi Messenger Alarm
is successfully connected to the wireless
network.
POWER WPS INTERNET
E1
1. Press the WPS button on your wireless
router (often the back side of router).
2. Press the WPS button on the JET WiFi
Messenger Alarm (the blue network status
light will flash continuously).