background image

2

TABLE OF CONTENTS

Waranty Policy ............................................................... 2
Information for your safety ............................................ 3
Safety precautions ........................................................ 3
Specifications ................................................................ 4
Unpacking, installation, pre-operation inspection ...... 5
Operation ....................................................................... 6

Precautions .................................................................... 7
Inspection and maintenance ........................................ 8
Hooks ............................................................................. 9
Chain .............................................................................10
Parts breakdown .................................................... 11, 12

WARRANTY POLICY

JET EQUIPMENT AND TOOLS LTD. 
(JET

®

) makes every effort to ensure 

its products are manufactured to the 
highest standards and are guaranteed 
against defects in materials and 
workmanship when the product is 
used for the purpose for which it was 
designed.

This guarantee applies only to JET 

products purchased new from a JET 
authorized distributor.

JET product warranties are extended 

to the original retail purchaser only. 
This warranty does not apply to any 
product showing signs of abuse, 
misuse, alteration, or having been 
improperly maintained or repaired.

This warranty does not cover 

damage attributable to normal wear 
and tear.

Any JET product that fails during 

normal use and is within the 
specified warranty period for that 
product will be repaired or replaced 
at JET’s discretion. Repairs and/
or replacements are warranted as 
described for the specific product and 
only for the remainder of the original 
warranty period.

Repair or replacement is the 

exclusive remedy for defective product 
under this warranty.

Warranty is expressly in lieu of 

all other warranties, including the 
implied warranty of merchantability or 
any implied warranty of fitness for a 
particular application.

Any JET product for which there is 

a warranty claim should be returned 
PREPAID to an authorized JET 
distributor or service centre. Authorized 
Warranty Depots are found at  
surewerx.com

ALL warranty claims must be 

accompanied by proof of purchase and 
an explanation of the defect or failure. 
It is the customer’s responsibility to 
provide this information.

JET shall not be held liable for any 

consequential or incidental damages 
for breach of any expressed or implied 
warranty on their products. No claims 
for damages of any type will be 
considered and all products are sold 
with this understanding.

Any costs incurred to obtain warranty 

consideration or services are the 
Customer’s responsibility including 
shipping and handling, travel, lost time,  
or lost production.

SPECIFIED WARRANTY – 

MATERIAL HANDLING

1 Year Limited Warranty

Chain Hoists Hand Cable Pullers

Air Hoists Lever Chain Pullers

Electric Hoists Grip Pullers

Electric Trolleys Manual Adjustable 
Trolleys

Drum Clamps Beam Clamps

Plate Clamps Blocks and Sheaves

Pallet Trucks Mobile Lift Tables

Winches

GENERAL INFORMATION ON JET CHAIN HOISTS AND PULLERS

Customs Lifts – Custom lift lengths are 
available, however, custom lift hoists 
and pullers are NOT returnable.

CAUTION: be sure that supporting 
structures and load-attaching devices 
used in conjunction with hoists, 
provide an adequate safety factor to 
handle the rated load plus the weight 
of the equipment. If in doubt, consult a 
qualified structural engineer.

This equipment is not to be used for 
lifting, supporting, or transporting 
people, or lifting, supporting, or 
transporting loads over people.

IMPORTANT: Before installation 
and operation, see maintenance and 
operations manual for additional 
warnings, precautions and operating 
instructions.

NOTE: Batteries supplied with certain 
products may have been subjected to 
long shelf life, resulting in low energy 
or a dead battery. Please source 
replacement batteries locally. Please 
follow instructions in the manuals for 
products using rechargeable batteries. 
Dead batteries do not constitute a 
warranty claim.

Summary of Contents for KLP Series













Reviews: