iameter
2)
s to
Spindle and Cutter Height
The JET JWS-35X Heavy-Duty Shaper comes with a 1-1/4” diameter, 4” tall (under the
nut) spindle. The spindle is equipped with a full set of spacers so it can secure shaper
cutters of virtually any thickness. The spindle mounts into a large, self-centering tapered
seat and is locked in place by a large captured nut and a heavy steel drawbar for security.
A large steel wrench is included for working with the spindle. An easy to use knurled
handle just inside the cabinet door locks and unlocks the spindle to make cutter changes
easier and safer.
We also offer ½”-d
(#708380), 3/4”-diameter
(#708317), 1”-diameter
(#708314), and 30mm-
diameter (#70837
spindles as accessories.
All spindles are 4” tall.
We also offer collets in
¼” (#708373) and ½”
(#708374) capacitie
handle router bits that are compatible with shaper speeds.
The full-height spindle (left) comes with various spacers that make securing
cutters easy. The spindle is installed using the taper seat, a large lock nut and a
drawbar. The height of the spindle combined with the spacious table opening
(right) allow the use of large diameter cutters and even stacking cutters that are
designed for that kind of operation.
The spindle has a full 4” vertical travel to accommodate large and small cutters as well as
using a portion of a cutters profile. An 8” diameter cast iron handwheel on the front of the
base cabinet makes height changes easy and accurate. A large, easy to read scale on the
cabinet next to the handwheel quantifies those changes as they are made.
The heavy cast iron mechanism below the table supports the spindle and motor
assemblies. The bulk of this cast iron assembly helps prevent vibration while contributing
to the overall stability of the spindle and cutter. The elevation mechanism has a set of
gibb screws that let the user compensate for wear that might occur in years to come.
Accessories
Additional Spindles
708373
¼” Router Collet
708374
½” Router Collet
708380
½” Spindle
708317 ¾”
Spindle
708314 1”
Spindle
708328 1-1/4”
Spindle
708372 30mm
Spindle
