JET motors are rated using a
continuous duty cycle rather than
“peak” or “max developed”
horsepower claims. Using the
continuous duty cycle provides
an accurate representation of the
power output of the JET motors
so you can make the best tool
buying decision for your work
shop environment.
A heavy-duty magnetic On/Off
switch controls the JET JWS-
35X Heavy-Duty Shaper. The
switch box is equipped with a
magnetic “key” that when removed prevents unauthorized startups. The magnetic switch
protects the JET JWS-35X Heavy-Duty Shaper from power fluctuations that could
damage the motor. It also prevents the motor from restarting should the power go out and
then come back on unexpectedly. The motor/cutter rotation can be reversed using a
switch on the front of the JET JWS-35X Heavy-Duty Shaper cabinet for different cutters
and special setups.
A large door in the cabinet side (left) provides easy access to the motor
and belt system. It even has a large window through which the belt
position can be confirmed.
The entire motor mount and spindle assembly (right) is heavy-duty for
maximum accuracy and durability. The belt tension release lever
(arrow) makes changing speeds fast and easy.
The JET JWS-35X Heavy-Duty Shaper has four spindle
speeds, 4000, 6000, 8000 and 10,000RPM. The speeds are
generated by a set of precisely machined stepped pulleys on
the motor and spindle shaft. The JET JWS-35X Heavy-Duty
Shaper connects the pulleys with a Poly-V-belt, known for
smooth power transmission, resistance to slipping and low
heat buildup.
The controls on the front of the
cabinet are easy to reach and
use. The magnetic On/Off
switch protects the motor and
you. The large cast iron
handwheel makes bit height
changes fast and easy.
Moving the Poly-V-belt between pulley positions is fast and
tool-free. A single lever releases belt tension. Move the belt
and flip the lever again to tension the belt for use. An easy to
reach belt tension adjuster is built into this release system
should the belt stretch.
A large access door in the base cabinet provides access to the belt mechanism and motor.
The door even has a window that allows the user to quickly confirm that the belt is in the
desired position without needing to open the door.
