manualshive.com logo in svg

Jet JWL-1642EVS, Operating Instructions And Parts Manual

The Jet JWL-1642EVS is a versatile wood lathe designed for precision craftsmanship. Unlock your creativity with this powerful and durable machine. Enhance your woodworking skills with ease by quickly accessing the free downloadable user manual and brochure from our website manualshive.com. Discover endless possibilities today!

Share
Download
background image

Introduction 

 
This manual is provided by JET covering the safe operation and maintenance procedures for Models 
JWL-16423EVS and JWL-1642EVS-2 Wood Lathes. This manual contains instructions on installation, safety 
precautions, general operating procedures, maintenance instructions and parts breakdown. These machines 
have been designed and constructed to provide years of trouble free operation if used in accordance to the 
instructions set forth in this manual. If there are any questions or comments, please contact either your local 
supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: 
www.wmhtoolgroup.com. 
 
 

Table of Contents 

Warranty ................................................................................................................................................. 2 
Warnings................................................................................................................................................. 3 
Grounding Instructions............................................................................................................................. 5 
115V Operation ....................................................................................................................................... 5 
230V Operation ....................................................................................................................................... 6 
Introduction ............................................................................................................................................. 7 
Table of Contents .................................................................................................................................... 7 
Specifications .......................................................................................................................................... 8 
Contents of the Shipping Container.......................................................................................................... 9 
Unpacking and Cleanup .......................................................................................................................... 9 
Assembly ................................................................................................................................................ 9 
Stand Shelf............................................................................................................................................ 10 
Tool Basket ........................................................................................................................................... 10 
Guard.................................................................................................................................................... 11 
Controls and Features ........................................................................................................................... 11 
Speed Change ...................................................................................................................................... 13 
Lathe Tools ........................................................................................................................................... 13 
Mounting the Workpiece Between Centers............................................................................................. 14 
Stock Selection...................................................................................................................................... 15 
Roughing Out ........................................................................................................................................ 15 
Coves, “V” Cuts, Parting and Beads....................................................................................................... 16 
Sanding and Finishing ........................................................................................................................... 17 
Face Plate or Bowl Turning.................................................................................................................... 17 
Mounting Stock...................................................................................................................................... 17 
Face Plate or Chuck .............................................................................................................................. 18 
Wood Selection ..................................................................................................................................... 18 
Checks and Cracks ............................................................................................................................... 18 
Distortion............................................................................................................................................... 18 
Tools for Bowl Turning........................................................................................................................... 18 
To Shape the Outside of a Bowl............................................................................................................. 19 
To Shape the Interior of a Bowl .............................................................................................................. 20 
Sanding and Finishing a Bowl................................................................................................................ 20 
Adjusting the Clamping Mechanism ....................................................................................................... 21 
Changing the Belt and Bearings............................................................................................................. 21 
Troubleshooting..................................................................................................................................... 22 
Part Breakdowns and Parts List ............................................................................................................. 23 
Wiring Diagram for JWL-1642EVS......................................................................................................... 28 
Wiring Diagram for JWL-1642EVS-2...................................................................................................... 29 
Indexer Positions................................................................................................................................... 30 

Summary of Contents for JWL-1642EVS

































Reviews:

No comments

Related manuals for JWL-1642EVS

Climax VM1350 Operating Manual preview
VM1350
Brand: Climax Pages: 98
KAKA Industrial F1.2X710 Assembly And Operating Instructions Manual preview
F1.2X710
Brand: KAKA Industrial Pages: 6
MachineryHouse AL-346V Instruction Manual preview
AL-346V
Brand: MachineryHouse Pages: 82
SoapEguipment Willow Way Instructions preview
Willow Way
Brand: SoapEguipment Pages: 2
NUTOOL MC550 Operator'S Manual preview
MC550
Brand: NUTOOL Pages: 92
Jet HVBS-56M Operating Instructions And Parts Manual preview
HVBS-56M
Brand: Jet Pages: 24
Jet HBS-56S Operating Instructions And Parts Manual preview
HBS-56S
Brand: Jet Pages: 28
Jet GHB-1330 Operating Instructions Manual preview
GHB-1330
Brand: Jet Pages: 32
Rikon Power Tools 70-150VSR Operator'S Manual preview
70-150VSR
Brand: Rikon Power Tools Pages: 24
MiniMax FORMULA T1 Manual preview
FORMULA T1
Brand: MiniMax Pages: 57
Butler KARACTER.TLX Instruction Manual preview
KARACTER.TLX
Brand: Butler Pages: 63

Brands by name

Popular brands

Load more brands