6
4.0
Specifications
Table 1
Model number
JWDS-1020
Stock number
723510
Motor and Electricals
Drum motor type
Totally enclosed, fan-cooled induction
Horsepower
1 HP (0.75 kW)
Phase
1
Voltage
115 V
Cycle
60 Hz
Listed FLA (full load amps)
8 A
Motor speed
1720 RPM
Starting amps
34.5 A
Running amps (no load)
4.8 A
Running capacitor
30
F 250VAC
Conveyor motor type
totally enclosed DC
Horsepower
1/30 HP (25 W)
Phase
1
Voltage
115 V
Listed FLA (full load amps)
0.6 A
Motor speed
54 RPM
On/off switch
Toggle with safety key
Power transfer
Direct drive
Power cable and plug
SJT 3x16AWG, 300V, 6 ft., 15A plug
Recommended circuit size
1
15 A
Sound emission
2
70.6 dB at 100cm (3.3ft.); 74.7 dB at 50cm (1.6ft.)
Capacities
Maximum board width (single pass)
10 in. (254 mm)
Maximum board width (two passes)
20 in. (508 mm)
Maximum board thickness
3 in. (76.2 mm)
Minimum board length
2-3/8 in. (60.3 mm)
Minimum board thickness
3
1/32 in. (0.8 mm)
Main materials
Main body
aluminum die casting and steel
Drum
extruded aluminum
Conveyor table
steel
Drum height adjustment handle
Plastic
Sanding Drum
Drum dimensions, L x Dia
10 x 5 in. (254 x 127 mm)
Drum speed
1725 RPM
Abrasive installed
80 Grit, 3in. wide, Alum. Ox.
Drum elevation per one rotation of handwheel
1/16 in. (1.6 mm)
Conveyor
Conveyor speed
variable within 0 to 10 FPM (0-3 MPM)
Conveyor table dimensions
10 x 15 in. (254 x 381 mm)
Dust collection
Dust port outside diameter
4 in. (101.6 mm)
Recommended minimum extraction volume
550 CFM
