Jet JWBS-140S, Operating Instructions And Parts Manual

Page: 18 / 28

18
Blade Width (in.) Length (in.) TPI Type Gauge (in.) Stock Number
Silicon steel 1/2 105 4 Hook 0.025 709598*
Silicon steel 1/2 105 6 Hook 0.025 709599*
Silicon steel 3/4 105 3 Hook 0.032 709517*
Silicon steel 3/4 105 10 Raker 0.032 709518*
* The 105” blades are for use with the optional riser block kit.
Other Accessories
708917 JWBS-12RF Rip Fence Assembly
Includes guide bars, rip fence assembly, fasteners, and mounting instructions with parts list.
708717A
JRB-14A Riser Block Kit
Increases depth of cut from 6" maximum to 12" maximum. Includes 6" cast block, long frame
bolt, front and back blade guards, 105” blade, and mounting instructions with parts list.
708716
JMG-14 Miter Gauge Assembly
For straight and angle cutting. Includes guide bar, pivoting support body, and adjustable
stops.
708719
JRB-14 Blade Block Set
Includes upper and lower replacement blocks made from a non-metallic composite material
with a dry lubricant to reduce friction and heat.
708127
JRBG-14 Roller Bearing Guides
Provides three bearing contact points to maximize support and reduce friction. Kit contains upper
and lower guide assemblies, mounting studs, adaptor blocks, and all mounting hardware.
708736
JWBS-14QT Carter Blade Tension Toggle Release
Three control positions—full release, partial tension for positioning, and full tension. For use
with 1/8" to 3/4" blades. Works in conjunction with threaded tension-control knob.