Jet JOVS-10 Operating Instructions And Parts Manual Download Page 3

Page: 3 / 20

Table of Contents

Warranty and Service..........................................................................................................................2

Table of Contents ...............................................................................................................................3

Warning .............................................................................................................................................4

Grounding Instructions ........................................................................................................................6

Introduction ........................................................................................................................................7

Specifications .....................................................................................................................................7

Unpacking ..........................................................................................................................................8

Contents of the Shipping Container ..................................................................................................8

Mounting Sanding Sleeves...............................................................................................................9

Installing Sanding Assemblies ..........................................................................................................9

Removing Sanding Assemblies ........................................................................................................9

Table Insert................................................................................................................................... 10

Sanding Assembly 90° to Table ...................................................................................................... 10

Replacing Sanding Sleeve ............................................................................................................. 11

Dust Collection ................................................................................................................................. 11

Maintenance .................................................................................................................................... 11

Replacement Parts ........................................................................................................................... 12

Breakdown for the JOVS-10 Oscillating Spindle Sander ................................................................... 13

Parts List for the JOVS-10 Oscillating Spindle Sander...................................................................... 14

Sanding Assemblies ...................................................................................................................... 16

Sanding Assemblies ...................................................................................................................... 17

Electrical Connections....................................................................................................................... 18

Summary of Contents for JOVS-10





















Search results

Summary of Contents for JOVS-10

Reviews:

Related manuals for JOVS-10

Brands by name

Popular brands

Jet JOVS-10, Operating Instructions And Parts Manual

Search results

Summary of Contents for JOVS-10

Reviews:

Related manuals for JOVS-10

Brands by name

Popular brands