5
Unpacking
Remove all parts from the box and check for
shipping damage. Report any damage
immediately to your distributor and shipping
agent.
Compare the contents of the box with the
following parts list to make sure all parts are
intact. Any missing parts should be reported to
your distributor. Read this instruction manual
thoroughly for operation, maintenance and
safety instructions.
Contents of the Box
1 Air
Hammer
1
Quick Release Chuck
5 *Chisels:
1 Peening Tool, 5
”
Lg.
1 Nut Splitter, 5
”
Lg. (3mm opening)
1 Panel Cutter, 5
”
Lg.
1 Flat Chisel, 5
”
Lg.
1 Pipe Cutter, 5
”
Lg.
1
Operating Instructions and Parts Manual
1 Warranty
Card
* Some typical uses for chisels:
•
Peening Chisel – for peening welds, punching, etc.
•
Nut Splitter – for removal of corroded or frozen nuts
•
Flat Chisel – scraping, chipping, scaling, metal cutting, cleaning welds, paint scraping, rivet busting, etc.
•
Panel Cutter – for automotive panels, vehicle extrication in rescue operations, etc.
•
Pipe Cutter – cutting off tail pipes
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.
