OWNER’S MANUAL
JBC Series Beam Clamps
WARNING
•
Read and understand all warnings and operating instructions before attempting to use the beam
clamp.
•
Beam clamps are designed and intended for use on “I” and “H” beams having an installed rated
value of the beam clamp.
•
NEVER install a beam clamp on a beam that has not been rated or tested for attachment of lifting
devices.
•
Beam clamp must be fully tightened and fully engage beam before use.
•
Beam clamps are designed for vertical lifts only. DO NOT use for side or angle pulls or lifts.
•
Always replace worn, damaged or missing labels.
Failure to comply with these warnings may result in personal injury and/or property damage.
JET
P.O. BOX 1349
Phone: 253-351-6000
WMH Tool Group
Auburn, WA 98071-1349
Fax: 1-800-274-6840
www.jettools.com
e-mail [email protected]
M-252710
6/02
