Jet JAT-101, Operations & Parts Manual

Page: 6 / 20

6 JAT-101,104,105 Impact Wrenches
Tool specifications
Model number JAT-101 JAT-104 JAT-105
Stock number 505101 505104 505105
Square drive 3/8 in. 1/2 in. 3/4 in.
Bolt capacity 7/16 in. 9/16 in. 1 in.
Anvil retainer type Hog ring Hog ring Hog ring + pin hole
Impact mechanism Twin hammer Twin hammer Twin hammer
Maximum torque 400 lbf•ft (542.3 N•m) 900 lbf•ft (1220.2 N•m) 1500 lbf•ft (2033.7 N•m)
Working torque
25-300 lbf•ft
(33.9-406.7 N•m) 50-700 lbf•ft
(67.8-949.1 N•m) 200-1300 lbf•ft
(271.2-1762.6 N•m)
Free speed 11,000 RPM 9000 RPM 5500 RPM
Blows per minute 1750 1300 1000
Average air consumption 5 CFM 6 CFM 9.5 CFM
Air inlet 1/4 in. NPT 1/4 in. NPT 3/8 in. NPT
Air hose inside diameter 3/8 in. 3/8 in. 1/2 in.
Required air pressure 90 psi (621 kPa) 90 psi (621 kPa) 90 psi (621 kPa)
Vibration value 4.28 m/s
2
12 m/s
2
12.9 m/s
2
Noise level
1
101 dB(A) 101 dB(A) 101 dB(A)
Power setting
3-position forward
1-position reverse 3-position forward
1-position reverse 3-position forward
1-position reverse
Grip Pistol style Pistol style Pistol style
Overall Length 6-1/4 in. (158.8 mm) 7-3/8 in. (187.3 mm) 8-3/4 in. (222.3 mm)
Housing material
Aluminum with TPE
molded grip Aluminum with TPE
molded grip Aluminum with TPE
molded grip
Net weight 3.65 lb. (1.66 kg) 5.95 lb. (2.70 kg) 10.36 lb. (4.70 kg)
Shipping weight 4.06 lb. (1.84 kg) 6.48 lb. (2.94 kg) 11.11 lb. (5.04 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.