12
Controls
Power Switch
– The
power
switch has two
positions,
off
and
on.
To operate the machine, the
Power
switch must be set to
on
. Then depress
micro-switch
(Figure 8) in the
trigger handle
to
start.
Locking Key –
When the saw is not in use, the
switch should be locked in the off position. To lock
the switch in the off position, pull out the
safety key
(Figure 7). The saw will not start with the key
removed. However, if the key is removed while the
switch is in the on position, it can be turned off
once. The saw will not restart until the key has
been reinserted into the switch.
Trigger Handle
– To operate, the
On/Off
switch
must be set to
on
and the
microswitch
on the
trigger handle
(Figure 8) depressed.
Operation
Before using the machine:
1. Check that safety devices (ex., blade guards)
are in position and work perfectly and that
personal safety requirements are complied
with.
2. Check the sharpness of the blade and verify
coolant flow.
To operate:
3. Make sure the work piece is securely clamped
in the vise.
4. Turn the power
on
(Figure 7).
5. Grip
the
trigger handle
(Figure 8) on the control
lever.
Figure 7
Figure 8
6. Start the blade by pressing the
micro-switch
on
the handgrip.
The down stroke speed of the head is controlled
manually by the operator.
When the cut is complete:
7. Raise the head.
8. Remove the work piece from the vise using the
vise hand wheels.
Summary of Contents for J-F225
Page 18: ...18 Exploded View...
Page 19: ...19 Wiring Diagram...
