Jet J-64812VS, Operating Instructions And Parts Manual

Page: 7 / 28

7
5.0 Specifications
Table size
Disc: 16-1/2 x 9 in. (420 x 230mm)
Belt: 7-5/16 x 14-11/16 in. (185 x 374mm)
Table material (both) Cast Iron
Table tilt (both) 45° out
Miter gauge groove (both) 3/4 in. (19mm)
Disc size & grit 12 in. (305mm), 80 grit
Disc Speed (no load) 1547 - 2813 RPM (1547 – 2813 min
-1
)
Platen material Cast Iron
Belt size & grit 6 x 48 in. (153 x 1219mm), 80 grit
Belt speed (no load) 2200 – 4000 SFPM (671 – 1220 m/min)
Dust port diameter Belt sander: 3-1/2 in. (88mm) Disc sander: 2 in. (50.8mm)
Dimensions: sander & stand
(L x W x H)
26-3/4 x 19-5/8 x 58-5/8 in.
(680 x 500 x 1490mm)
Motor
2HP, 3-phase*, 60Hz, 1710 RPM, (1710 min
-1
)
Amps (full load amps) 13.0A
Voltage Input 230V only, single-phase
Power cord 14AWG x 3C, 6ft, SJT
Power plug 6-15P, 250V/15A, installed
Sound emission (approx.) 79 dB at 3ft. without load
Weight 288 lbs. (131 kg.)
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
*Drive portion of the motor is single-phase. One winding of the 3-phase motor is being used for regenerative braking
on the system.