manualshive.com logo in svg

Jet IBGM-8VS, Operating Instructions And Parts Manual

Share
Download
Jet IBGM-8VS Operating Instructions And Parts Manual Download Page 5

 

 

5

3.0

  About this manual 

This manual is provided by JET, covering the safe operation and maintenance procedures for a JET IBGM-8VS 
Variable Speed Bench Grinder with Multitool Attachment. This manual contains instructions on installation, 
safety precautions, general operating procedures, maintenance instructions and parts breakdown. Your grinder 
has been designed and constructed to provide consistent, long-term operation if used in accordance with the 
instructions set forth in this document.  

The operator is encouraged to familiarize him/herself with ANSI B7.1 – 

Safety Requirements for Use, Care and 

Protection of Abrasive Wheels.

 

If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our 
web site: www.jettools.com. 

Retain this manual for future reference. If the grinder transfers ownership, the manual should accompany it. 

  Read and understand the entire contents of this manual before attempting assembly 

or operation!  Failure to comply may cause serious injury! 

 

Register your product using the mail-in card provided, or register online: 

http://www.jettools.com/us/en/service-and-support/warranty/registration/ 

 

 

Summary of Contents for IBGM-8VS

























Reviews:

No comments

Brands by name

Popular brands

Load more brands