Jet IBDG-248, Operating Instructions And Parts Manual, Page: 7 / 36

7
Dimensions
Overall
dimensions
(L x W x H) Sanding arm vertical
23-7/16 x 15-1/16 x 25-29/32 in.
(595 x 383 x 658 mm)
25-13/32 x 15-1/16 x 20-3/4 in.
(645 x 383 x 527 mm)
Sanding arm horizontal
23-7/16 x 26-27/32 x 12-7/32 in.
(595 x 682 x 310 mm)
25-13/32 x 21-11/16 x 11-3/4 in.
(645 x 551 x 298 mm)
Shipping dimensions (L x W x H)
26-9/16 x 24-19/32 x 16-15/16 in.
(675 x 625 x 430 mm)
21-15/32 x 24-19/32 x 16-15/16
(545 x 625 x 430 mm)
Main materials
Disc sander
Disc Aluminum
Disc guard
Aluminum
Disc lower cover Aluminum
Disc table Cast iron
Trunnions Aluminum
Belt sander
Belt table Cast iron
Belt table bracket Sheet metal
Tool rest
Sheet metal
Tool rest bracket
Sheet metal
1 subject to local and national electrical codes.
2 The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
n/a = not applicable
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
4.1 Mounting hole dimensions
Figure 4-1 Base mounting holes, all models