Jet HVBS-712V, Operating Instructions And Parts Manual

Page: 6 / 32

6
5.0 Specifications
Table 1
Stock number 415560 415559
Model number HVBS-712DV HVBS-712V
Style Deluxe model Base model
Motor and Electricals
Main
motor
Type Brushed DC
Horsepower 1 HP (0.76 kW)
Phase Single
Voltage 115V
Cycle 60 Hz
Listed FLA (full load amps)
7.5 A
Main motor speed 3500 RPM
Commutator brush life (approx.) 3000 hours
Coolant
pump
Type Totally enclosed, cast iron immersion pump
Horsepower 1/8 HP (0.09 kW)
Phase Single
Voltage 115/230V (prewired 115V)
Cycle 60 Hz
Listed FLA (full load amps) 0.5 / 0.25 A
Pump motor speed 3450 RPM
Capacitor 1

F 400V
On/off switch toggle
Power transfer
V-belt
Power cord SJT 16AWGx3C, 6-1/2 ft. (200cm), with plug
Recommended circuit size 1 15 A
Sound emission without load
2
60dB at 40 in.
Capacities
Round
90-degrees 7 in. (177.8 mm) 7 in. (177.8 mm)
45-degrees 5 in. (127 mm) 4-1/2 in. (114.3 mm)
Rectangle
90-degrees
1(H) x 12(W) in.
2(H) x 11-1/4(W) in.
4(H) x 11(W) in.
7(H) x 10-1/4(W) in.
1(H) x 12(W) in.
2(H) x 11-1/2(W) in.
4(H) x 11(W) in.
7(H) x 10-3/8(W) in.
45-degrees 6(H) x 4(W) in. 6-1/2(H) x 4-1/2(W) in.
Square
90-degrees 7 x 7 in. 7 x 7 in.
45-degrees 5 x 5 in. 4-1/2 x 4-1/2 in.
Gearbox oil capacity 3/4 pint (0.35L)
Coolant tank capacity 2.5 gal. (9L)
Bow and Blade
Blade type (provided) Bi-metal, 5/8T
Blade size 3/4 x 0.032 x 93 in. (19 x 0.81 x 2362 mm)
Blade speeds Variable, 88-270 FPM (27-83 MPM)
Blade wheel diameter 11-3/4 in. (298.5 mm)
Gear ratio 1/20 (M2.5x20T)
Bed and Vise
Bed height from floor (without wheels) 22.4 in. (569 mm)
Vise swivel 45 deg.
Vise detents 0,15,30,45 deg. n/a
1 subject to local and national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.