92
WIL
T
ON DRILLING
DRILLING
93
WIL
T
ON DRILLING
DRILLING
15" AND 20" DRILL PRESSES
•
Cast iron head
•
Large quill allows greater accuracy
•
Head casting features a permanently lubricated ball bearing spindle assembly, using
four heavy duty ball bearings mounted in an enclosed quill for extended life
•
Massive T-slotted production work table (Model 2550 only)
•
Table tilts 45°
•
Large ground steel column diameter for maximum head and
table support
•
3-3/8" stroke for deep hole
applications
•
Accurate depth stop for precise hole depths
STANDARD EQUIPMENT
•
5/8" Drill chuck and arbor
15" AND 20" DRILL PRESSES
STOCK NUMBER
2530
2500
2550
Type
15" Bench
15" Floor
20"Floor
Drills to Center of Circle (in.)
15
15
20
Cast Iron Drilling Capacity (max./in.)
5/8
5/8
3/4
Steel Drilling Capacity (max./in.)
1/2
1/2
5/8
Quill Diameter (in.)
1-7/8
1-7/8
2-1/4
Quill Travel (in.)
3-3/8
3-3/8
4-3/4
Spindle Taper
2 MT
2 MT
3 MT
Number & Range of Spindle Speeds (RPM)
12 (250, 340, 390, 510, 600, 650, 990,
1550, 1620, 1900, 2620, 3100)
12 (250, 340, 390, 510, 600, 650, 990,
1550, 1620, 1900, 2620, 3100)
12 (150, 260, 300, 440, 490, 540, 1150,
1550, 1840, 2220, 2950, 4200)
Overall Table Size (in.)
10 x 10
10 x 10
18-1/2 x 16-1/2
Table Working Surface (in.)
10 x 10
10 x 10
14 x 16
T-slot Number & Size (in)
N/A
N/A
3 & 1/2
Column Diameter (in.)
2-7/8
2-7/8
3-5/8
Base Size (in.)
11 x 18-1/2
11 x 19-1/2
22-3/4 x 17-3/4
Spindle to Base (in.)
24-1/2
48-3/4
43-1/2
Motor
3/4HP, 115V, 1Ph, 1725 RPM
3/4HP, 115V, 1Ph, 1725 RPM
1-1/2HP, 115V, 1Ph, 1725 RPM
Floor Space Required (in./L x W x H)
26 x 13-3/8 x 39
26 x 13-3/8 x 63-1/2
34 x 21 x 67
Net Weight (lbs.)
157
185
321
*Capacities for continuous production use will vary based on application
2530
2500
2550
