JET DRILLING
jettools.com
88
DRILLING
89
jettools.com
JET DRILLING
DRILLING
RADIAL ARM DRILL PRESS
RADIAL ARM DRILL PRESS
•
Spindle head has hardened and ground gears mounted on a
spline shaft
•
Column designed for rigidity and minimal deflection
•
The arm is ribbed to withstand stress and minimize deflection
•
Arm is mounted with a ground sliding way which elevates easily
with the touch of a switch
•
High carbon steel spindle is spline driven and supported by large
tapered roller bearings
•
Base plate has T-slots and drain channels
•
Coolant tank is incorporated into the casting
•
Motor has an independent overload protection system
•
Downfeed scale has satin chrome finish
•
Spindle reversing switch is conveniently located
•
Limit switches at lower and upper limits prevent over-travel of arm
STANDARD EQUIPMENT
•
Complete coolant system
•
Worktable
•
Amp meter
•
Reversing controls
•
Anchor bolt set
•
Fluorescent worklight
•
Tool box with tools
STOCK NUMBER
320032
Model Number
JRD-1000
Steel Drilling Capacity (power feed/in.)
1-3/8
Cast Iron Drilling Capacity (in.)
2
Steel Tapping Capacity (in.)
3/4
Cast Iron Tapping Capacity (in.)
1
Steel Boring Capacity (in.)
3
Cast Iron Boring Capacity (in.)
4
Column Diameter (in.)
9
Distance Spindle to Column (min./in.)
16-1/2
Distance Spindle to Column (max./in.)
42-1/4
Head Travel on Arm (in.)
25-1/2
Distance Spindle to Bed (min./in.)
21-5/8
Distance Spindle to Bed (max./in.)
43-3/4
Vertical Movement of Arm (in.)
21-5/8
Size of Worktable (L xW x D/in.)
27 x 16-1/2 x 15
T-Slot (number & size/in.)
3 & 3/4
Spindle Taper
MT-4
Spindle Travel (in.)
9
Number of Spindle Speeds
12
Range of Spindle Speeds (RPM)
44 – 1,500
Number of Feeds
3
Feed per Revolution (in./rev.)
002, .0035, .006
Spindle Motor
2HP, 230V, 3Ph
Arm Elevation Motor
1HP
Coolant Pump Motor
1/8HP
Floor Space Required (in.)
62 x 27 x 80
Net Weight (lbs.)
3520
