104
WIL
T
ON DRILLING
DRILLING
wiltontool.com
DRILLING
105
5' ARM RADIAL DRILL PRESS
WIL
T
ON DRILLING
5' ARM RADIAL DRILL PRESSES
•
The power train gears and spline shafts are made of the finest quality,
heat treated and ground nickel chrome steel–giving extra strength and
smoothness to high torque loads
•
The spindle is made of the finest case hardened steel, for extra strength
and wear
•
The spindle is supported by double row taper roller and thrust ball
bearings at the nose, with thrust and radial axis bearings at the top
•
The spindle is built to withstand exceptionally heavy drilling and boring
loads and to insure maximum accuracy
•
Push button controls are all reduced to 110V
•
Electrical circuits are located in the built-in control box at the rear of the
arm–this keeps the controls dust-and-humidity-free while making them
easily accessible for maintenance
•
Entire frame is made of Meehanite and high tensile strength cast iron to
handle the heaviest of jobs
•
Arm raising safety device prevents arm from dropping
•
Counter balanced mechanism for spindle return
•
12 speeds/6 feed rates make exotic materials easier to drill, bore
and tap
•
Centralized control center
•
Automatic tool ejector
•
Hydraulic head and column clamping
STANDARD EQUIPMENT
•
Built-in work light
•
Coolant pump
•
Tool kit
•
Box table
STOCK NUMBER
1600R
Drilling Capacity (in.)
2-1/2
Cast Iron Drilling Capacity (in.)
2-7/8
Steel Tapping Capacity (in.)
2
Cast Iron Tapping Capacity (in.)
2-3/8
Steel Boring Capacity (in.)
5
Cast Iron Boring Capacity (in.)
7-3/8
Column Diameter (in.)
17
Distance from Column to Spindle (max./in.)
63
Distance from Column to Spindle (min./in.)
17
Travel of head (Horizontal) (in.)
49-5/8
Distance Base to Spindle (max./in.)
63
Distance Base to Spindle (min./in.)
13
Travel of arm (Vertical/in.)
50
Table Dimensions (in.)
27-7/8 x 19-5/8 x 15-3/4
T-slot Number & Size (in.)
3 & 7/8
Base Dimensions (in.)
97-5/8 x 41-11/32 x 8-1/4
Spindle Taper
5 MT
Quill Travel (in.)
14-9/16
Spindle Travel w/Power Feed Engaged (in.)
13
Range of Spindle Speeds (RPM)
12 (40–1920)
Feed Rates (IPR)
6 (.003–.038 IPR)
Motor
7-1/2HP, 230/460V, 3Ph,
Prewired 230V
Elevating Motor
2HP
Clamping Motor
1HP
Coolant Pump Motor
1/2HP
Machine Height from Floor (in.)
124-58/64
Floor Space Required(in./L x W x H)
116 x 55 x 112
Shipping Weight (lbs.)
11,220
