background image

 

2

Warranty and Service 

 

WMH Tool Group warrants every product it sells. If one of our tools needs service or repair, one of our 
Authorized Service Centers located throughout the United States can provide quick service or 
information. 

In most cases, a WMH Tool Group Service Center can assist in authorizing repair work, obtaining parts, 
or perform routine or major maintenance repair on your JET product. 

For the name of an Authorized Service Center in your area, please call 1-800-274-6848, or visit our web 
site at www.wmhtoolgroup.com 

More Information 

Remember, WMH Tool Group is consistently adding new products to the line. For complete, up-to-date 
product information, check with your local WMH Tool Group distributor, or visit our web site at 
www.wmhtoolgroup.com 

WMH Tool Group Warranty 

WMH Tool Group makes every effort to assure that its products meet high quality and durability standards 
and warrants to the original retail consumer/purchaser of our products that each product be free from 
defects in materials and workmanship as follows: 1 YEAR LIMITED WARRANTY ON ALL PRODUCTS 
UNLESS SPECIFIED OTHERWISE. This Warranty does not apply to defects due directly or indirectly to 
misuse, abuse, negligence or accidents, normal wear-and-tear, repair or alterations outside our facilities, 
or to a lack of maintenance. 

WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE, 
BEGINNING FROM THE DATE THE PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED 
HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. 
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, 
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL WMH TOOL GROUP 
BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, 
CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR 
PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY 
TO YOU. 

To take advantage of this warranty, the product or part must be returned for examination, postage 
prepaid, to an Authorized Service Center designated by our office. Proof of purchase date and an 
explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we 
will either repair or replace the product at our discretion, or refund the purchase price if we cannot readily 
and quickly provide a repair or replacement. We will return the repaired product or replacement at WMH 
Tool Group’s expense, but if it is determined there is no defect, or that the defect resulted from causes 
not within the scope of WMH Tool Group’s warranty, then the user must bear the cost of storing and 
returning the product. This warranty gives you specific legal rights; you may also have other rights, which 
vary from state to state. 

WMH Tool Group sells through distributors only. Members of the WMH Tool Group reserve the right to 
effect at any time, without prior notice, alterations to parts, fittings and accessory equipment, which they 
may deem necessary for any reason whatsoever. 

 

Summary of Contents for FS-1636N









Reviews: