Jet 505921, Operations & Parts Manual

Page: 5 / 16

JET 5
About this manual
This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model
JAT-920 Pneumatic Riveter. This manual contains instructions on safety precautions, general operating
procedures, maintenance procedures and parts breakdown. Your tool has been designed and constructed
to provide consistent, long-term operation if used in accordance with the instructions set forth in this
document.
The instructions and warnings in this manual may not encompass all possible workplace environments. The
operator is expected to take appropriate precautions and exercise common sense. As with any tool
operation, safety of operator and bystanders should be first priority.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at
our web site: www.jettools.com.
Record the serial number and purchase information of your tool on the cover of this manual for quick access.
Retain this manual for future reference. If the tool transfers ownership, the manual should accompany it.
Tool specifications
Model number JAT-920
Stock number 505921
Capacity, mild steel 3/16 in.
Maximum pulling load 2,000 lb.
Blind rivet setting capacity 3/16 in.
Stroke length 9/16 in.
Traction power 1,940 lb.
Included nosepieces Four: 3/16, 5/32, 1/8, 3/32 in.
Air inlet 1/4 in. NPT
Air hose inside diameter 3/8 in.
Required air pressure 90 psi (621 kPa)
Overall Length 10-3/4 in. (273 mm)
Housing material Aluminum
Net weight 3.48 lb. (1.58 kg)
Shipping weight 3.81 lb. (1.73 kg)
1 The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.