12
CAUTION!
Only operate the lathe using this key.
1.6.4 Prohibition, warning and mandatory labels
INFORMATION
All warning labels must be legible. Check them regularly.
1.7 Safety check
Check the lathe at least once per shift. Inform the person responsible immediately of any dam- age,
defect or change in operating function.
Check all safety devices
Ь
at the beginning of each shift (with the machine stopped)
Ь
once a week (with the machine in operation)
Ь
after every maintenance and repair operation
Check that prohibition, warning and information labels and the markings on the lathe
Ь
can be identified (if not, clean them)
Ь
are complete
INFORMATION
Use the following table for organizing the checks.
General check
Equipment
Check
OK
Protective
cover,
Fitted, firmly bolted and not damaged
Labels, markings
Installed and legible
Date:
Checked by (signature):
Run test
Equipment
Check
OK
EMERGENCY STOP
button
When the EMERGENCY STOP button is activated, the
lathe should be switched off.
Lathe chuck key
Once the chuck key has been released, it should be
automati- cally pressed out of the lathe chuck.
Date:
Checked by (signature):
1.8 Individual protection gear
Summary of Contents for 50000915M
