6
Read and understand the
entire contents of this manual before
attempting assembly or operation. Failure to
comply may cause serious injury.
4.0
Assembly
2-PERSON LIFT.
Failure to comply may cause injury.
The numbers in parentheses match the callout
numbers in the Figures and in the parts
breakdown.
Refer to Figure 4-1:
1. Carefully place the main collector cabinet
(33) upside down on cardboard and install
swivel casters (23) onto the corners of the
main cabinet and secure each caster using
4 hex flange bolts (24).
2. Install the drawer casters (28) onto the four
corners of the debris drawer and secure
each caster using 4 Phillips pan head
screws (29).
3. Carefully turn the cabinet upright onto the
casters.
Refer to Figure 4-2:
4. Install a handle (20) on the main cabinet
(33) using flat head screws (19).
5. Unlatch and open door. Slide filter (2) into
door and secure in place using the retaining
plate buckle (39).
6. Fit the Hose Clamp (50) onto the Fireproof
Collecting Bag (47), then use a screwdriver
to tighten the clamp.
Refer to Figure 4-3:
7. Push inlet adaptor (26) onto the collector
cabinet (33) and secure using the Phillips
pan head screw (34).
8. Install a handle (20) on the debris drawer
(30) using flat head screws (19).
9. Install the retaining plate (45) with washer
(44) and T-screw (46) on both sides of the
drawer (30).
Assembly is complete.
Figure 4-1
Figure 4-2
Figure 4-3
