4
2.0
Specifications
Model number
JDC-510
Stock number
414900
Motor and electricals
Motor type
totally enclosed fan cooled, induction, capacitor start
Horsepower
3 HP (2.25 kW)
Phase single
Voltage 230
V
Cycle 60
Hz
Listed FLA (full load amps)
15A (230V)
Start capacitor
600MFD 125VAC
Run capacitor
45
F 350VAC
On/off switch
magnetic contactor with overload relay
Motor speed
3450 RPM
Power cord
SJT 14AWGx3C, 6 ft. (183 cm)
Power plug installed
6-20P
Recommended circuit size
1
15A for 230V
Recommended fuse/breaker size
1
20A for 230V
Noise emission
2
85 dB at 5 ft. (152.4 cm) from impeller
Main materials
Cabinet
Steel (sheet metal frame)
Impeller Steel
Inlet port, adaptor, and cap
Steel
Casters Polyurethane
Chip drawer
Steel
Filter
Aluminum outer frame with micro steel mesh, fireproof
Dust collection bag
Non-woven (fabric), fireproof
Capacities and Efficiency
Inlet port, outside diameter
8 in. (203 mm)
Inlet adaptor
8” to three 3 in. (102mm)
Air flow rate with filter
957 CFM (27.1 CMM) at 8in. inlet
412 CFM (11.65 CMM) at 3in. inlet
Air flow velocity
2736 FPM (834 MPM) at 8in. inlet
8366 FPM (2550 MPM) at 3in. inlet
Maximum static pressure
9.4 inH
2
O
Number of filters
1
Filter type
5 Micro Filter paper, fireproof
Filter size LxWxH
19-3/8 x 25 x 1-25/32 in. (492 x 635 x 46 mm)
Filter efficiency
84.3% of 1 micron to 5 microns; 95.4% of 3 microns to 10 microns
Dust collection bag capacity
50 L
Dimensions
Overall dimensions, LxWxH (with handle
and casters installed)
32.5 x 32 x 39.6 in. (826 x 810 x 1007 mm)
Shipping dimensions, LxWxH
32 x 27-1/2 x 42 in. (808 x 700 x 1067 mm), includes pallet
Swivel casters diameter
2-1/2 in. (63.5 mm)
Impeller diameter
12 in. (305 mm)
Weights (approximate)
Net weight
212 lb. (96 kg)
Shipping weight (includes pallet)
251 lb. (114 kg)
1
Subject to local/national electrical codes. Recommendation based upon dedicated circuit.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
