7
Portable Pressure Washer
This unit is to be connected to a cold water source
only
The motor of this pressure washer will
not
run, it will only operate when the trigger
is squeezed.
1. Connect the outlet hose to the washer and connect the spray gun to the
outlet hose.
2. Connect nozzle and nozzle extension.
3. Check gauze filter is clear of any blockage.
4. Connect the water supply hose.
5. Check that the hose has no kinks in it.
6. Turn on water and check for leaks.
7. Depress trigger to allow air to be expelled though the pump and hoses,
lock the trigger.
8. Plug in machine and turn on switch.
9. Unlock trigger and use the pressure washer.
1. Turn off the motor (push switch to the
off
position.)
2. Unplug the unit from the power source.
3. Turn off the water supply.
4. Press the trigger of the gun to depressurise the system.
5. Disconnect the garden hose from the pressure washer.
6. Wipe all surfaces of the unit with a damp clean cloth.
7. Engage the gun safety lock.
Always
turn off the unit’s motor
before
turning off the unit’s water supply.
Serious damage could occur to the motor if the unit is run without water.
Never
disconnect the high-pressure discharge hose from the machine while the
system is still pressurised. To depressurise the unit, turn off the motor, turn off the
water supply and squeeze the trigger 2-3 times.
Summary of Contents for RX550i
Page 1: ...RX550i...
Page 2: ......
