WARRANTY
MANUFACTURERS LIMITED WARRANTY
Jet Tech Systems Corporation (Jet Tech) hereby warrants all new warewashers bearing the name "JET TECH" and
installed within the continental United States of America or Canada to be free from defects in material or workmanship,
under normal and regular usage and operation, for a period of one (1) year following the date of original installation,
(
unless specified otherwise
) but in no event can exceed eighteen (18) months from the date of shipment from the
factory.
If a defect in material(s) or workmanship is detected; or found to exist within the stated period above, Jet Tech, at its
sole discretion, shall either repair or replace any original equipment manufacturers part which has proven to fail within
the machine; providing that the equipment has not been altered or tampered with in any manner, has been installed
correctly as per the owners manual, and maintained and operated in complete accordance with this manual.
The labor cost to repair or replace any part proven to be defective, as per above clause(s), shall be covered by Jet
Tech Systems, within the continental United States of America or Canada; provided that: prior authorization for this
labor was approved by Jet-Tech Systems, the service work was performed by an authorized Jet Tech service agency;
and that this agency installed an original and genuine Jet Tech part in the machine. Any repair work performed by a
non-authorized service depot remains the sole responsibility of the user, and Jet Tech Systems will not be held
responsible.
The installation of any generic part will not be valid; and therefore voids this warranty.
All
authorized labor coverage shall be limited to regular hourly rates only. Any supplemental hourly rates or charges, such
as weekends or emergency premiums remain the responsibility of the user.
Jet Tech Systems Corp. (Jet Tech) hereby states that: warranty travel time shall be limited to, and without exception, a
round-trip total of two (2) hours OR mileage up to a maximum of one hundred (100) miles round-trip. Any charges
exceeding those stated herein must have prior authorization by the factory.
Exceptions to above warranty are
:
(A) Damages resulting from shipping, handling or abuse. (B) Incorrect installation
and/or connections. (C) Adjustments or calibration of any thermostats or timers. (D) Faults due to lack of regular
maintenance or cleaning of any internal part(s). (E) Replacement of any wearable items such as: glasswasher curtains,
or peristaltic squeeze tubing or gaskets. (F) Excessive lime, mineral, alkali or hard water conditions and (G) Poor
results due to: use of an incorrect type of detergent (for non-commercial type applications), and excessive or
inadequate water temperature(s) or pressure conditions.
JET TECH SYSTEMS CORPORATION STATES THAT THERE ARE NO OTHER WARRANTIES, EXPRESSED OR
IMPLIED, THAT ARE NOT SET FORTH HEREIN, JET TECH SYSTEMS CORPORATION SHALL ASSUME NO
OTHER RESPONSIBILITY, EITHER DIRECT OR NON-DIRECT, OR BE LIABLE FOR ANY OTHER OR ADDITIONAL
LOSS OR DAMAGE WHETHER BEING DIRECT OR CONSEQUENTIAL, AS A RESULT OF ITS EQUIPMENT.
The manufacturer reserves the rights to alter design and specifications without notice.
JET TECH SYSTEMS CORP.
7014 Cote de Liess
e
Montreal Quebec
CANADA, H4T 1E7 Tel: (514} 737-9701
Toll Free: (888} ASK-4-JET Fax: (514}
342-3854 E-Mail:service @ jet-tech.com
Web: www.jet-tech.com
Warranty:
One year parts & labor (Continental USA and Canada).
Exceptions:
Model "Piper" - 90 days labor
& One year parts.