4.12 Prevention measure recommendations:
We recommend you carefully follow the instructions below in order to maintain the dishwasher in perfect and safe
operational conditions:
Use the appliance only for the purpose it has been designed for.
Any other use is considered improper and dangerous.
Use baskets suitable for dishes to load and unload the machine.
Do not leave the machine exposed to atmospheric agents.
DO NOT
bypass the safety devices of the machine (microswitches, thermostats) envisaged by the manufacturer.
DO NOT
operate the machine if it is not connected correctly and all safety devices are not operating.
Have any repair performed only at the manufacturer’s premises or at authorised service centres; only
genuine spare parts must be used.
Failure to follow these instructions may jeopardise safety of the machine.
Do not leave the machine on if not in use.
We recommend you do not use steel brushes or sponges, acid products and corrosive substances to clean
stainless steel.
Never start the machine washing cycle without the overflow in the tank.
Before emptying the machine, always turn it off using the wall-mounted switch.
Never move any magnetic objects close to the machine, it could start even with the hood open.
Never use the hood as a support surface.
Do not wash the machine using direct jets of water.
Always close the water supply when the machine is not being used.
Never open the machine hood quickly if it has not finished the cycle.
Never immerse bare hands in the washing solutions.
Never remove the machine panels if the upstream electricity supply has not been previously disconnected.
The machine must not be used by untrained personnel.
Never use the machine without protections.
Do not use the machine to wash objects of shapes, types and sizes that are not compatible with those declared
by the manufacturer.
Turn off the machine immediately using the main switch if you notice any water leaks coming from the machine.
CAP.5
DISHWASHER USE
5.1
DISHWASHER USE :
A : Line button
B : Display
C : Speed selection button
D: Start cycle button
E: Machine on lamp
F: Autotimer on lamp
G: Booster heating lamp
H: Tank heating lamp
I: Machine filling lamp
L: Failure lamp on.
5.2
Setting up the dishwasher for use:
Open the wall-mounted water valve
Switch on the wall-mounted line switch
Place the overflow and washing filters in their envisaged positions
11
Summary of Contents for FX-44
Page 1: ...FX 44 Operation Manual...
