8
CENTERING YOUR TA FENCE ON THE TABLE:
STEP 4:
Now that your fence is fastened in to the fence tracks, you will need to align the fence to
the bit opening and adjust your scales accordingly.
a)
Ensure your router is mounted in the table top with a router bit in your router.
b)
Loosen the Clamping Knobs (Part #
45
), and slide your fence so it is centered around the router bit.
d)
Tighten the Fence Clamping Knobs.
e)
f
)
Slide the scale to line the “0” on the scale to the front edge of the fence.
See
Figure 12.
h
)
Tighten the set screw. Repeat this for the other scale on the opposite side of the fence.
The
TA fence should be centered on your router table.
c)
Now check that the fence is parallel to the front edge of the table.
Figure 11
Figure 12
Figure 10
With the 1/8” hex key provided, loosen the set screws on the front of the left and right hand
scales. See
Figure 11.
g
)
Ensure scales are
on correct side
Ensure the right and left hand track scale (Part #14) are on the proper sides, See Figure 11.
