7 Installation of the system
¦
Multiway Receiver with DVR Installation
1) Install Hard Disk
Fig1
Fig2
Fig3
11
2) Connect Camera and Monitor
There are 4 camera input and 2 monitor output with BNC connector.
3) Connect Power Cord
Please use power adapter come along with DVR.
4) 2.4GHz ANT Installation
12
Push carrier body further into
Cartridge frame until fully
inserted (Fig3)
A
B
A: Locked (Non-removable)
B: Unlocked (Removable)
Key Lock
Please follow left figure installation
antenna and adjust its orientation
make received the best image.
Note: If the transmitter and the
receiver is horizontal position then
antenna must vertical install; if the
transmitter and receiver is vertical
position then antenna must
horizontal install.
Slide the carrier body out of the
cartridge frame (Fig1)
CAUTION
DON’T take out HDD when
DVR running!
Connect the HDD date cable and
the power cable to the HDD(Fig2)
Summary of Contents for 2036T/R
Page 13: ......
