BA-40400-02-V14 | 31
Operating instructions
12.1.6 Menu 1.3: Trend representations
mg/l
pH
°C
Zoom-
Zoom+
ESC
0.39
7.02
26.3
1.3
display
24 h.
Fig.24: Main menu >> trend
The actual trend of the measurements is represented by coloured
curves. These can be constructed at different time intervals. A time
range of 60 minutes, 4 hours or 24 hours can be displayed. To change
the desired time to a respectively bigger or smaller interval use the
„Zoom +“ and „Zoom -“.
12.1.7 Menu 1.4 Status display
next
presel.
ESC
status controller
1.4.2
W1: 0,45 mg/l
Xp1: 50 %
W2: 7,10 pH
Xp2: 20 %
Y1: 25 %
Tn1: 25 min.
Y2: 20 %
Tn2: 25 min.
mg/l
pH
°C
26.3
7.04
0.39
Fig.25: Main menu >> status
The status-display shows the most significant data for accurate predic-
tion of TOPAX proper functioning.
Menu
Status displays
1.4.1
Main parameters of all configured controllers
1.4.2
Switching status of all outputs
1.4.3
Physical values and calibrated resistivity values of all inputs
1.4.4
• used software version
• serial number
• hardware identification data
• input identification
• outputs identification
• number of operating hours
By pressing the “next” key, the TOPAX switches to menu 1.4.1 to 1.4.4.
Save and activate preselects
It is also possible for certain applications to save the adjusted values
and activate them when needed. For these presettings several names
can be allocated:
Set 2
ESC
Set 1
1
2
3
4
define
Set 3
activate
preselects
(Autoset)
1.4.8
mg/l
pH
°C
26.3
7.04
0.39
Fig.26: Main menu >> status >> presel.
Press the “presel.” key and the device switches to menu 1.4.8. Select
from one of the four presettings that you want to activate or overwrite
with the actual values. To select press the arrow keys
▲
and
▼
.
The device goes to menu 1.4.8.1:
ESC
ab<=> 01
Set_1____________________
(A...Z)
preselects
1.4.8.1
edit name and save
ab<=> AB
save
mg/l
pH
°C
26.3
7.04
0.39
Fig.27: Main menu >> status >> presel. >> define
