MLX
MULTI-LINX LED Fixture
Modular Linkable Linear Fixture
www.jescolighting.com
Tech Support:
855.592.0029
Instruction sheet subject to change without prior notice.
15 Harbor Park Drive
Port Washington, NY 11050
Main Line:
800.527.7796
Fax Line:
855.265.5768
219 South 6th Ave
City of Industry, CA 91746
Main Line:
855.654.0110
Fax Line
: 626.333.2955
Designed, Developed and
Assembled in the U .S.A
Page 3 of 8
JW 06/14/2017
MULTI-LINX
4
Bring MLX fixture up to where CABLES are installed. Insert
CABLE into CABLE GRIP by pushing down on the spring
locking mechanism, pull out CABLE from exit hole on
CABLE GRIP, release spring mechanism on CABLE GRIP
when desired height is reached. Repeat the process with the
second CABLE. Adjust as needed to ensure fixture is level.
CABLE SUSPENSION (LINEARLY CONNECTED) INSTALLATION INSTRUCTIONS
5 Installation of Multiple Fixtures with MLX-DC
Plug in (1) MLX-DC between every (2) MLX fixtures that will
be connected. Slide in T-NUT BAR as illustrated onto the slot on
top of MLX fixture at the output side.
5 A-A
Match and insert RIGID PLATE mounting holes to
T-NUT BAR’s screw posts. Partially secure NUT on T-NUT
BAR’s screw posts, do not tighten.
5 B-B
Connect second MLX fixture via input port to direct
connector in first MLX fixture
5 C-C
Slide RIGID PLATE and T-NUT BAR to the center of 2
connected MLX fixtures. Tighten nuts on T-Bar with a NUT DRIVER.
Follow STEP 4 on hanging instructions.
6 Multiple Fixtures Connected with MLX-CC
Follow STEP 4 on hanging instructions then proceed to below
instructions
Plug in CONNECTING CABLE to input and output port to power
adjacent MLX fixtures.
3 A-A
Attach CABLE GRIP to T-NUT MOUNT, do not tighten
all the way.
3 B-B
Slide 2x & assembly into slot on top of MLX fixture
MLX-DC
MLX-DCS
NUT
RIGID PLATE
T-NUT BAR
G
G1
G2
G3
A
8 mm| 5/16 in
NUT DRIVER
F
F
INPUT
OUTPUT
INPUT
MLX-CC-(6/12/18)
MLX-DC
CABLE GRIP
CABLE GRIP
T-NUT MOUNT
T-NUT MOUNT
C4
C5
C4
C5
H
OUTPUT
MLX-DC
MLX-DCS
NUT
RIGID PLATE
T-NUT BAR
G
G1
G2
G3
A
8 mm| 5/16 in
NUT DRIVER
F
F
INPUT
OUTPUT
INPUT
MLX-CC-(6/12/18)
MLX-DC
CABLE GRIP
CABLE GRIP
T-NUT MOUNT
T-NUT MOUNT
C4
C5
C4
C5
H
OUTPUT
MLX-DC
MLX-DCS
NUT
RIGID PLATE
T-NUT BAR
G
G1
G2
G3
A
8 mm| 5/16 in
NUT DRIVER
F
F
INPUT
OUTPUT
INPUT
MLX-CC-(6/12/18)
MLX-DC
CABLE GRIP
CABLE GRIP
T-NUT MOUNT
T-NUT MOUNT
C4
C5
C4
C5
H
OUTPUT
CABLE
CABLE GRIP
C3
A
C4
PUSH
MLX-24 18”(46cm)
MLX-48 44”(112cm)
MLX-96 88”(224cm)
2 FIXTURES 2-3/8” (60mm)
3 FIXTURES 4-3/4” (121mm)
4 FIXTURES 7-3/16” (183mm)
5 FIXTURES 9-9/16” (243mm)
6 FIXTURES 11-7/8” (302mm)
5
4
3
6
A-A
A-A
B-B
B-B
C-C
F
F
G3
G3
G3
H
G3
G1
A
G2
C4
C4
C4
C4
C4
C5
C5
G2
A
A
INSTALLATION OF MULTIPLE LINEAR FIXTURES
A
C3
C3
C3
C3
For Electrical Connection, See Page 8 >>>
