MLX
MULTI-LINX LED Fixture
Modular Linkable Linear Fixture
www.jescolighting.com
Tech Support:
855.592.0029
Instruction sheet subject to change without prior notice.
15 Harbor Park Drive
Port Washington, NY 11050
Main Line:
800.527.7796
Fax Line:
855.265.5768
219 South 6th Ave
City of Industry, CA 91746
Main Line:
855.654.0110
Fax Line
: 626.333.2955
Designed, Developed and
Assembled in the U .S.A
Page 2 of 8
JW 06/14/2017
MULTI-LINX
MLX-24 18”(46cm) | MLX-48 44”(112cm) | MLX-96 88”(224cm)
Recommended MLX-MC Spacing:
PLASTIC ANCHOR
MLX-MC
#8 SELF-TAPPING SCREW
DRILL 1/4” HOLE
MASONRY
DRYWALL/CEILING TILE
MLX-PC(05/10)
MLX-PC-HW(05/10)
MLX
MLX
MLX- MEC
Locking Screw
METAL STUD
WOOD
DRILL 1/8” HOLE
MLX-MC
MLX-DC
OR
MLX-CC-06/12/18
INPUT
OUTPUT
END FEED
TOP FEED
#8 SELF-TAPPING SCREW
MLX-PC(05/10)-TF
MLX-PC-HW(05/10)-TF
MLX- MEC
MLX- FEC
BLACK to BLACK
WHITE to WHITE
GREEN or COPPER to GREEN
SUPPLY WIRES
INPUT
OUTPUT
MLX
MLX
CABLE SUSPENSION (LINEARLY CONNECTED) INSTALLATION INSTRUCTIONS
PLASTIC ANCHOR
COUPLER MOUNT
MOUNTING SCREW
DRILL 1/4” HOLE
DRILL 1/8” HOLE
COUPLER
COUPLER
CABLE GRIP
T-NUT MOUNT
CABLE
COUPLER MOUNT
MOUNTING SCREW
BLACK (HOT)
WHITE (NEUTRAL)
GREEN
OR COPPER
(GROUND)
SUPPLY WIRES
A-A
B-B
MLX-PC-HW(05/10)
MLX-PC-HW(05/10)-TF
MLX-PC (05/10)
MLX-PC (05/10)-TF
MLX-24 18”(46cm) | MLX-48 44”(112cm) | MLX-96 88”(224cm)
Recommended MLX-SCK Spacing:
MLX-SCK
C
C1
C1
C2
C2
CABLE
C3
CABLE
C3
COUPLER MOUNT
COUPLER
C1
C2
C3
C4
C5
MASONRY
DRYWALL/CEILING TILE
METAL STUD
WOOD
TOOLS REQUIRED
HARDWARE INCLUDED
with MLX-SCK
REQUIRED COMPONENTS FOR SINGLE FIXTURE INSTALLATION
ADDITIONAL COMPONENTS REQUIRED FOR CONNECTING MULTIPLE FIXTURES
MINI PHILLIPS
SCREWDRIVER
1
A-A
Plug in MLX-PC or MLX-PC-HW into MLX fixture’s
input port and secure power connector to fixture with
provided mounting screws with a mini-phillips screwdriver.
1 B-B
Top feed cable is pre-wired onto MLX fixture
Single Pendant
Installation
End feed fixture Insert: MLX-MEC into MLX’s output
port. Top feed fixture insert: MLX-MEC into MLX’s
output port and insert MLX-FEC into MLX’s input port.
Multiple Fixtures
Installation
Insert (1) MLX-DC or (1)
MLX-CC to the output connection of all connecting fixtures.
For the last connecting fixture. Insert MLX-MEC to the
output connection.
2
Based on building material of intended mounting surface,
determine the best mounting method. Each MLX fixture
requires (2) MLX-SCK for installation, recommended
distance between each MLX-SCK is determined by
MLX fixture’s length.
2 A-A
Drill a 1/4” hole in mounting surface and make sure
the depth is at least 1/4” past the length of the plastic
anchor. Insert plastic anchor in drilled hole. Insert mounting
screw through COUPLER MOUNT and screw into plastic
anchor. Repeat the process for second COUPLER MOUNT,
then secure COUPLER with CABLE to COUPLER
MOUNT by hand.
2 B-B
Drill a 1/8” pilot hole and fasten mounting screw and
COUPLER MOUNT on to mounting surface. Repeat the
process for second COUPLER MOUNT.
SUSPENSION WI
TH CABLES
Single or Multiple fixtures connected
linearly.
MLX-PC(05/10)
MLX-PC-HW(05/10)
MLX-PC(05/10)-TF
MLX-PC-HW(05/10)-TF
MLX-(24/48/96)
MLX-DC
with
MLX-CC-(06/12/18)
MLX-DCS
OR
MLX-SCK-(1/2)
MLX-MEC
MLX-FEC
required for top
feed (-TF) input
MOUNTING SCREWS
WIRE CUTTER
PLASTIC ANCHOR
FOR USE WITH DRYWALL
2
A-A
B-B
POWER DRILL WITH:
1/4” DRILL BIT
1/8” DRILL BIT
PHILLIPS BIT
A
B
C
D
E
F
G
H
1
B
B
A
A
E
D
D
B
B
A
A
A
A
A
A
C
C
C1
C1
C1
C1
C1
C2
C3
A
D
E
F
H
D
D
A-A
B-B
Continue on page 3 ---->
