Jesco MAGDOS LK, Operating Instructions Manual

Page: 33 / 60

Control
Information about the dosing pump
33
© Lutz-Jesco GmbH 2015
Subject to technical changes.
150225
BA-10221-02-V03
Stepper Motor-driven Diaphragm Dosing Pump
MAGDOS LK
Operating Instructions
5.
Press Back .
4
The Safety code is activated. You must enter it when accessing
the
System setup
menu.
10.6.7.1 Entering the safety code
Safety code
1 1 1 1
OK
8.2
Next - +
Fig. 40: Entering the safety code
1.
Use the + and - keys to set a value of 0 to 9 for the first digit of the
code and then press
Next
.
2.
Proceed as described under point 1 for the other digits.
3.
After entering all the digits, press OK .
4
If your input is correct, the dosing pump displays the
System
setup
menu.
i
If you have forgotten the code, please contact Lutz-Jesco
GmbH.
10.6.7.2 Deactivating the safety code
1.
Press
Menu
.
2.
Use the or key to choose the System setup menu item and
press
OK
.
3.
Enter the correct
Safety code
and press
OK
.
4.
Use the or key to choose the Safety code menu item and
press Setup .
5.
Keep pressing
Next
until
On
is selected.
6.
Press - .
7.
Press Back .
ü
The safety code is deactivated.
10.6.8 Set „Factory setup“ menu item
Resets the dosing pump‘s control unit settings to the factory default
setting.
1.
Use the or key to choose the
Factory setup
menu item and
press Setup .
2.
Press OK .
4
The dosing pump displays the
Language
menu (menu 6.3); see
also “Menu settings at initial commissioning” on page 29.
ü
The dosing pump is reset to the factory setup setting.
10.6.9 Set „Eco-Mode“ menu item
Setting energy-saving mode. Doing this changes the power consump tion,
the delivery capacity and the delivery pressure; see also “Technical Data”
on page 12.
1.
Use the or key to choose the
Eco-Mode
menu item and press
Setup .
You can choose from the following options:
n
Off (factory default setting),
n
Eco-Mode 1
.
2.
Use the or key to choose the desired function and press
OK
.
4
The system displays the selected
Eco-Mode
on the start screen
after the respective operating mode.
Fig. 41: "Slow Motion 1" mode display in manual mode
10.7 Information about the dosing pump
In the Info menu item, you can find a wide range of information about
your dosing pump.
1.
Press Menu .
2.
Use the or key to choose the
Info
menu item and press OK .
4
The dosing pump displays menu 7.1
Info 1
.
Info 1
Strokes / min 180
Capacity 3.80 l/Std
Calibration 3.80 l/Std
Menu
7.1
Next
Fig. 42: Display of menu Info 1
3.
Keep pressing
Next
to get to subsequent
Info
menus.
The Info menus display the following information:
Menu Information
Info 1
n
Maximum strokes/minute
n
Maximum delivery capacity in l/hr
n
Calibrated delivery capacity in l/hr
Info 2
n
Stroke volume at factory setting in ml
n
Stroke volume after calibration in ml
Info 3
n
Running time of the dosing pump in hrs.
n
Total strokes of the dosing pump carried out
Info 4
n
Software version and date of updating
n
Part number
n
Serial number
Info 5
n
Power supply voltage
n
Power frequency
Info 6 Assignment of connection socket 1
Info 7 Assignment of connection sockets 2 and 3
Tab. 34: Explanation of the Info menus
4.
Press Menu to exit the
Info
menu.
Manual mode Eco 1
Menu Stop - +
Liter
h
0%
0.00