WARNING!
To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at
all times.
WARNING!
Risk of Electric Shock. Connect only to a grounding type receptacle protected by a ground-fault circuit-in-
terrupter (GFCI). Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI.
Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other equipment.
WARNING!
To reduce the risk of electric shock, replace damaged cord immediately.
WARNING!
To reduce the risk of electric shock, do not use extension cord to connect unit to electric supply; provide a
properly located outlet.
1.5 Hazards due to non-compliance with the safety instructions
Failure to comply with the safety instructions may endanger not only people, but also the environment and
the unit. Non-compliance with the safety instructions can lead to the loss of all entitlement to damages.
The following hazards in particular may arise:
• Failure of major unit functions.
• Failure of specified methods for maintenance and repair.
• Danger to people due to electrical, mechanical and chemical effects.
• Danger to the environment due to leakage of hazardous substances.
1.6 Safe operation
The safety instructions contained in this Operation & Maintenance Manual must be observed. The owner is
responsible for ensuring compliance with local safety regulations.
Disturbances susceptible of impairing safety are to be eliminated immediately!
1.7 Safety instructions for the owner/operator
• Leakages (e.g. when a membrane breaks) of dangerous materials to be conveyed (e.g. aggressive, poi-
sonous) must be purged in such a way that they do not become a risk to people and the environment.
Statutory regulations must be observed.
• Danger due to electric current must be excluded (for further details, refer to the German VDE
1)
stand-
ards as well as local rules and regulations as well as chapter 1.4).
1)
Association of German Electrotechnical Engineers
1.8 Safety instructions for installation, maintenance and inspection
The owner must ensure that all maintenance, inspection and installation work is undertaken by authorized
and duly qualified skilled personnel who have also studied this Operation & Maintenance Manual.
The dosing pump must always have come to a complete stop before starting any work on the pump. The
procedure specified in the Operation & Maintenance Manual for shutting down the dosing pump/system
must be observed without fail.
Dosing pumps or systems in contact with potentially harmful media must be decontaminated.
All safety mechanisms and guards must be refitted and reactivated as soon as the work is complete.
The instructions outlined in chapter 7.2 “Installation location” and 9. “Start up” must be observed before
starting the pump/system.
1.9 Unauthorized modification and production of spare parts
The device may only be modified or converted in consultation with the manufacturer. Genuine spare parts
and accessories authorized by the manufacturer ensure greater safety. The use of other parts can void the
liability for the subsequent consequences.
4
| Operation & Maintenance Instructions |
