ATTENTION!
If changing the chemical, check the materials in the pump and other system parts for chemical resistance. If
there is a danger of chemical reaction between the different media, clean thoroughly beforehand.
IMPORTANT!
The lock screw must be retightened after adjusting the stroke length. The setting of the adjusting knob may
otherwise change. thus causing faulty flow rates.
After changing the electrical connections, e.g. removing the level monitor, the threaded cable joint must be
tightened to maintain the protection class of the dosing pump.
DANGER!
Risk of burns. Shock wave: parts may fly off and cause fatal injury. Under no circumstances must the device
be used in potentially explosive atmospheres.
CAUTION!
Hot metal parts may burn your hands. Always disconnect the mains power supply before opening the
magnetic drive and allow the dosing pump to cool down for at least one hour.
CAUTION!
Malfunctions may arise in circuits, magnetic strips or mobile phones if brought into the direct vicinity of the
magnet.
1.12 Scope of delivery
IMPORTANT!
Carefully unpack the dosing pump and any accompanying accessories ordered, so that small parts are not
left inside the packaging. Compare the delivery content with the delivery note immediately. If there are any
discrepancies, determine the cause.
The following are part of the scope of delivery:
• Dosing pump MAGDOS DE/DX
• Suction and discharge side connections
• Operating Manual
6
| Operation & Maintenance Instructions | Safety instructions
