4 | Operating Manual GW 601 | Safety notices
WARNING!
To reduce the risk of electric shock, do not use an extension cable to connect the device to the power
supply; use an appropriately located socket.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE!
1.5 Hazards due to non-compliance with the safety instructions
Failure to comply with the safety instructions may endanger not only people, but also the environment and
the unit. Failure to follow the safety instructions may invalidate any damage claims.
The following hazards in particular may result:
• Failure of major unit und system functions.
• Danger to persons due to electrical, mechanical and chemical effects.
1.6 Safe operation
The safety instructions contained in this operating manual must be observed. The operating company is
responsible for ensuring compliance with local safety regulations. Any faults that could affect safety must be
rectified immediately.
1.7 Safety instructions for the operating company/operator
Consumables and replacement parts must be disposed of safely and in an environmentally friendly manner.
(Legal requirements must be observed).
Risks from electric current must be excluded (for further details, refer to the VDE
1
regulations and the
regulations of the local public utilities).
1) VDE = Association of German Electrical Engineers
1.8 Safety instructions for inspection, maintenance and installation work
The operating company must ensure that all maintenance, inspection and installation work is carried out by
authorised and duly qualified personnel, who have read and understood this operating manual.
Before carrying out installation and maintenance works, always make sure that the unit is disconnected
from power supply. The device must be prevented from being switched on again during the above work.
Only then may additional modules be mounted or removed and connections made. Non-compliance can
result in damage to the unit and invalidate the warranty. All safety and protective equipment must be
reattached and activated immediately after the work has been completed.
1.9 Unauthorised modification and production of spare parts
Modifications and conversions require prior consultation with the manufacturer. Genuine spare parts and
accessories authorised by the manufacturer ensure greater safety. No liability can be accepted for any
damage resulting from the use of non-Lutz-Jesco parts.
Use only the manufacturer's spare parts and sensors. Otherwise the warranty is invalidated.
Summary of Contents for GW 601
Page 28: ......
