background image

6.2 Control Usage 

Power Switch 

 
 

Press this button, the battery power gauge lights will turn on from left to right. Press 
again, all the LED lights are off. 

 

 
 

In some emergency, you can directly turn off power by press power button. 

Sleep Mode 

 

If the joystick has no operation more than 20 minutes, the power turn off automatically, and 
the system in the sleep mode, system will be woke up from sleep mode by press power 
button. Speed adjustment 
According to user’s habits and the circumstances, the wheelchair driving speed is adjustable. 
Adjust speed by press decrease button or increase button. 

 

Speed is divided into five sections, ranged by 20%, 40%, 60%, 80%, 100% 
of the max speed. 

 

First gear of speed: 20% of the max speed. 
Fifth gear of speed: 100% of the max speed. 

 

Horn Button 

 
 

Press the horn button, the horn will sounds until you release the button. 

 

Battery Power Gauge 

 

After turn on the power, the battery power gauge is working. The battery 
power gauge also shows the battery remaining power capacity. 

 

As the picture shown, the battery power is full. 

 

When there is only the red or yellow LED light lit, the battery should be charged. And for a long 
distance driving, the battery should be fully charged. If only the red LED light is lit, the battery 
power is extremely inadequate, users need to charge battery as soon as possible. Use of joystick 

 

 
 

The wheelchair moving direction is controlled by joystick. The moving extent 
of joystick also controls the moving speed. 

 

Please turn on or turn off the power when the joystick is in the middle position. 

 

Otherwise the control will let out wrong operation signal. 

Release the joystick to middle, this mistake will stop. If the mistake is still continuing, perhaps 
this part is malfunction, do not use it and contact with your dealer for maintenance. 

 

6.3 Electric Footrest and Backrest 

 

 
 
 
 
 
 
 
 
 
 
 

 

The first line is backrest control button. Press on left button, backrest goes up, press on right 
button, backrest goes down; 

 

The second line is left footrest control button. Press on left button, left footrest goes up, press on 
right button, left footrest goes down; 

 

The third line is right footrest control button. Press on left button, Right footrest goes up, press 
on right button, right footrest goes down. 

 

Summary of Contents for JRWD303














Reviews: