Jerr-Dan MPL-60, Operation And Safety Manual, Page: 60 / 98

Section 4 : Operation
4-22 5376000278
5. Raise the boom to align the
bushings on the hold back bar
with the the bushings on the
tow sling lugs.
6. Swing the hold back bars out
toward the lower tow sling lugs
on the back of the body. Allow
the hold back bars to extend as
necessary.
7. Rotate the “CAM” handles on
the hold back bars 180° to the
open position.
8. Extend and connect the hold
back bars to the tow sling lugs
using the pins that you removed
earlier.