Copyright Jericho Lab. 2021
Explore. Measure. Understand.
4 of 16
OVERVIEW
WARNING: This product contains small parts. Not for children under 5 years old.
WARNING: This product is not intended for critical use, internal use or medical use.
DISCLAIMER: Jericho Laboratory will not be held responsible for any damage other than to the device
itself.
The Thermistor Data Logger (TDL) can measure 1 to 8 temperatures simultaneously. It is compatible
with the Arduino Nano 3.0 ©. Data is sent continuously to the computer.
PRODUCT FEATURES
Designed for scientists, engineers and researchers
Ready-to-use product
Can measure temperatures, relative humidity, radiant temperature, luminosity, conductivity
through resistive sensors.
Applications in the field of biology, chemistry, engineering and others.
No battery required
Free access to the source code
PACKAGE CONTENT
- 1X Thermistor Data Logger (TDL) Revision B (Controller)
- 8X calibrated temperature probes (thermistors) with 1m wire
- 1X calibration certificate
- 1X USB cable, male-to-male, 1m length, OTG
- 1X flat mini-screwdriver
- 1X high-accuracy resistor, 10 kΩ +/- 0.1% (can be used to verify calibration of the TDL)
- 1X cotton rope, 3mm dia., for humidity measurement
- 1X photoresistor (GL5516, CdS type, visible light) (warning: this item contains cadmium)
- 1X extension wire, 28 AWG, 2m length
REQUIREMENTS
- Minimum Hardware: CPU: 1 MHz; Memory: 250 MB RAM.
- Internet Access with Internet Explorer 9 or higher
- 1X USB port (2.0 or 3.0)
- Operating system: Windows®7 and newer, Mac OS X®, Linux®, Android® (See details below)