Jeppesen Nobeltec Solid State Heading Sensor, Owner'S Manual

Page: 43 / 48

APPENDIX B – NMEA 2000 INTERFACING
Jeppesen Marine
37
SSHS NMEA 2000 Installation-Offset Correction
Installation-offset correction can be performed by sending a Manufacturer’s proprietary NMEA
2000 PGN to the SSHS. The procedure is as follows:
1. Make sure the vessel is laying in flat water on a known heading.
2. Send the following NMEA 2000 PGN to the SSHS:
•
PGN 126208 – NMEA Command Group Function – Manufacturer’s
proprietary Installation Offset.
This PGN performs the installation offset of the
compass. It sets the roll and pitch outputs to zero at the compass’ current
orientation and sets the heading reading for the current orientation to the value
given by the PGN.
LEGAL DISCLAIMER AND LIMITED WARRANTY
Jeppesen Marine
®
does not warrant that the Nobeltec
® Solid State Heading Sensor
is error
free nor that it is compatible with products manufactured by any other company than Jeppesen
Marine.
The Nobeltec Solid State Heading Sensor works in conjunction with Nobeltec Navigation
Software, as well as other digitized chart data and electronic information from the Global
Positioning System (GPS), which may contain errors. Jeppesen Marine does not warrant the
accuracy of such information, and you are advised that errors in such information may cause
the Nobeltec Solid State Heading Sensor to malfunction or give incorrect readings.
Jeppesen Marine is not responsible for damages or injuries caused by your use of or inability
to use the Nobeltec Solid State Heading Sensor correctly; by the interaction of the Nobeltec
Solid State Heading Sensor with products manufactured by any other agency; or by errors in
any data or other information utilized by the Nobeltec Solid State Heading Sensor provided by
third parties.
Warning
: Nautical navigation is an inherently dangerous undertaking and should be
engaged in only by persons trained and experienced in navigation. The Nobeltec
Solid State Heading Sensor is intended for use only by persons trained in navigation
and only as a navigational aid, not as the sole method of navigation.
Please Note
: The information in this manual and the specifications included herein
are subject to change without notice. Jeppesen Marine shall not be liable for
technical or editorial statements, errors or omissions contained herein, nor for
incidental or consequential damages resulting from furnishing, performance or use of this
material or any version of any Nobeltec Navigation software program.