21
Dreama
jenx.com
Accessories
Side Lying Platform: Fitting
Step 1: Insert four positioning pads as shown
opposite, these will form the base for the side
lying platform
Step 2: Position the side lying leg platform on top
of the pads. There is a webbing strap with a lock-
ing foot on each corner of the board. Secure the
locking feet then tighten the webbing by pulling
upwards on the strap.
Side Lying Platform: Pad Adjustment
A spacer block is available (shown left)to provide a
height between a small and medium pad. To use,
simply insert the small pad into the hole so it fits
snugly and do up the Velcro.
The positioning pads on top
of the platform are used to
support the upper leg. These
pads can be moved anywhere
along the surface of the board or
alternatively, removed altogether.
To alter their position, loosen the buckle located under the board and move the pads up or down, depending
on the position desired. Once you have the pads in position, tighten the buckle.
You can also alter the width between the pads
by moving them along the webbing strap. To do
this, undo the cam lock, move the pads to the
desired position and close the cam lock against
the pad.
Do not use hoops over clients head or neck
1
2