19
3.6.8 Printer Setup …
Select the Printer Setup sub menu buy highlighting the option and pressing the STO key. The
following menu will be shown:
Data Log Interval
can be set between 00:00:01 and 23:59:59.
Memory Full
gives the user to select the Stop (cease storing results and not to
overwrite existing stored information) or Overwrite (overwrite existing
results) options when the memory is full. Selection is made via the
Up/Down keys which toggle between thetwo settings.
Prompt Before Deleting
can be enabled or disabled by using the Up/Down keys which toggle
between the two settings.
Clr Key
toggles between Deletes Results Before, Deletes All Results and
Deletes Results Since. Selection is made via the Up/Down keys
which toggle between the four settings.
Exit
enables the user to exit the Setup menu and return to the main
instrument display.
Printer Interface
toggles between Infrared and Serial. Selection of the preferred option
can be made using the Up/Down keys which toggle between the two
settings.
Serial Printer Baudrate
toggles between 9600 and 1200. Selection of the preferred option can
be made using the Up/Down keys which toggle between the two
settings. (Refer Section 6.2).
352 050/REV A/03-03
13
