Digital II_V_PB.en
Side 7 of 9
Issue May 2016
Side 7 – Operating Instructions DIGITAL II and V
By setting the charge, the metal weight is determined. For the Rhodiumbath a setting of 10 Amin
would be mathematically a deposition of 60 mg (10 Amin x 6 mg / Amin = 60 mg). Please note, these
are purely theoretical values, which may differ from the actual values.
Functions
15 programs can be saved
Display in 4 different languages (GER, ENG, SP, and F) is possible. For the choice of language press
„OK“ button for 3 sec
For the standby mode press button “start” for 3 sec
The programs are flexible installable
15 programs can be used
EF Degreasing
Au
Gold
Ag
Silver
Rh
Rhodium
Ru
Ruthenium
Pd
Palladium
Pt
Platinum
Ni
Nickel
Cu
Copper
The programs from 1 to 6 are unnamed. For each tank up to 3 programs can be installed.
Approach to programming
1.
Turn on main switch
2.
Press button „progr“
3.
Select with the rotary switch the desired program
4.
Confirm with “ok” button
5.
Now enter the working parameters. Press the respective button (time, voltage, etc. see below)
and select the value using the rotary switch. The entries in each case confirm with
"ok":
„Temp“
Temperature (if the bath must be heated)
„Volt“
Voltage
„Time“
Choose between minute and second (or choose charge see above)
If no time is entered permanent mode is chosen automatically.
6.
When all values are entered, press button „progr" for 3 seconds to save the settings. The display
shows the previously entered values
7.
Press button „save“
8.
Confirm with „OK“ and return to the actual values
9.
Start the process with „start“
