Jensen VX7010, Operating Instructions Manual

Page: 230 / 250

125
VX7010
iGO primo excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually
you cannot reach the speed limit on them.
Carpool or HOV lanes can be used if a given number
of passengers are traveling in the vehicle. You should
check whether you are allowed to use carpool lanes
before enabling this road type.
Vehicle types:
t Maneuver restrictions and directional constraints are taken into account when
planning a route.
t
Roads are used only if access for cars is allowed.
t Private roads and resident-only roads are used only they are inevitable to reach
the destination.
t
Walkways are excluded from routes.
t
Neither maneuver restrictions nor directional constraints are taken into account
when planning a route.
t
Roads are used only if access for pedestrians is allowed.
t
Controlled-access roads are excluded from routes.
t
A private road is used only if the destination is there.
t Speed limits are not used in route calculation and an average walking speed is
used when calculating the estimated time of arrival.
t
Maneuver restrictions and directional constraints (if they are applied to bicycles
in the map data) are taken into account when planning a route.
t
Roads are used only if access for bicycles or pedestrians is allowed.
t
Controlled-access roads are excluded from routes.
t
A private road is used only if the destination is there.
t
Speed limits are not used in route calculation and an average cycling speed is
used when calculating the estimated time of arrival.