Jensen VX3022, Operation Manual

Page: 4 / 44

5
VX3022
Never expose this unit, amplifier and speakers
to moisture or water to prevent electric sparks
or fire.
Please don't change the fuse on the power cord
without professional guidance, using an
improper fuse may cause damage to this
unit or even cause fire.
Please contact your nearest dealer if one of the
following symptoms is experienced:
(a). Water or other objects enter the unit.
(b). There is smoke.
(c). Peculiar smell.
Only connect the unit to a 12-volt power supply
with negative grounding.
Never install this unit where the operation &
condition for safe driving is impaired.
Never use the video display function in the
front when driving to prevent the violation of
laws & regulations and also to reduce the risk of
traffic accident except for using rear view
video camera.
P l e a s e r e a d t h r o u g h t h e s e o p e r a t i n g
instructions so you will know how to operate
your model properly. After you’ve finished
reading the instructions, keep this manual in a
safe place for future reference.
To ensure safe driving, please adjust the volume
to a safe and comfortable level in case of
emergency situations.
Safety Precautions
1.) Never disassemble or adjust the unit
without any professional guidance. For details,
please consult any professional car shop /
dealer for inquiry.
2.) If the front panel or TFT monitor is dirty,
please use a clean silicone cloth and neutral
detergent to wipe off the spot. Using a rough
cloth and non-neutral detergent such as
alcohol for cleaning may result in damage to
the monitor.
3.) If any abnormal behavior of the unit is
found, please refer to trouble shooting guide
of this manual. If no relevant information is
found, please press the [RESET] key on the
front panel to resume factory default.
4.) If you have parked the car in hot or cold
weather for a long time, please wait until the
temperature in the car becomes normal before
operating the unit.
5.) Using the car heater in low temperature
environment may result in moisture inside the
unit, DO NOT use the unit in this situation.
Eject the disc and wipe off the moisture on the
disc. If the unit still doesn't work after a few
hours, please contact the service center.
6.) Do not impact the LCD monitor which
could cause damage.
7.) To prevent damage to the screen, avoid
touching it with sharp objects.
8.) To provide a clear demonstration and
an alternative for easy understanding to the
operation of this unit, graphic illustrations are
used. However, some illustrations are different
from the actual images displayed on the
screen.
9.) Operate the unit correctly according to
this manual to prevent unnecessary problem.
The guarantee won't be valid if the problem is
caused by inappropriate operation.